Safetech Products
The Doorlock
QLDLZW
Door Lock Keypad
1.0.0
ZM5202
6.51.06
0x023C (572)
0x0001 (1)
0x0002 (2)
ZC10-15105003
2015-09-04 10:50:56.6436
N/A
Enhanced 232 Slave
N/A
The Doorlock is a lock for any door that opens with Bluetooth, RFID, and Z-Wave. Finally, a personal security solution for your home or office!
The Doorlock is a replacement lock for any door that allows you to enter and exit using an RFID chip in various forms (ring, card, wristband, etc.), your mobile device through Bluetooth, and your home security system through Z-Wave. The lock tracks who goes in and out and allows you to monitor its events through an easy-to access history log. It is easily installed with two screws and a snap connector, and includes a latch that can be adjusted to fit almost any door. It's persistent lock feature ensures you never forget to lock your door, and can be toggled on or off depending on the use case. Finally, a reliable security solution for your home or office!
Product Picture
Prepare your Z-Wave controller to add a device to the network (refer to your controller's user manual.) Push the Z-Wave button on The Doorlock. The button is accessed through a small hole, insert a paperclip or similar to push it. (See diagram in Product Manual for button placement.)
Prepare your Z-Wave controller to remove a device from the network (refer to your controller's user manual) Push the Z-Wave button on The Doorlock. (See diagram in Product Manual for button placement.)
To reset The Doorlock's Z-Wave settings to their factory defaults, hold the Z-Wave button down for 5 seconds. (See diagram in Product Manual for button placement.) The reset procedure should only be used when the primary controller is missing or inoperable.