show home
2 Outlet Power Strip
ZW1502
Power Strip
01
ZM5202
6.51.06
0x015D (349)
0x0621 (1569)
0xF21C (61980)
ZC10-16020003
2016-02-16 23:40:59.7204
N/A
Routing Slave
Always On Slave
Z-Wave controlled Two outlets power strip
The 2 outlets power strip provides two Z-Wave outlet for remote controlled by controller through Z-Wave gateway for internet of thing service and can be configured in Z-Wave sensor network, if Z-Wave certified controller features remote access, you can control two outlets from your mobile phone separately, and manual On/Off two outlets the same time by push button .
Product Picture
1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network. 2. Once the controller is ready to include your device, press up and release the toggle to include it in the network. 3. Once your controller has confirmed that the device has been included, refresh the Z-Wave network to optimize performance. 4. The device is associated in the same group when it included in setting process. Now you can control your Z-Wave device according to groups, scenes, schedules and automation programmed.
1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network. 2. Once the controller is ready to Exclude your device, press up and release the toggle to exclude it from the network.
1. Press and hold the top button for at least 3 seconds while you plug the smart switch into a receptacle. 2. Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.