show home
5 Outlet Power Strip with USB charger
ZW 1505
Power Strip
01
ZM5202
6.51.06
0x015D (349)
0x0651 (1617)
0xF51C (62748)
ZC10-16020005
2016-02-16 23:41:58.3296
N/A
Routing Slave
Always On Slave
Five Outlet power strip and supply two USB 5V/2.1A charger
The 5 outlets power strip provides five Z-Wave outlets for remote controlled by controller through Z-Wave gateway for internet of thing service and can be configured in Z-Wave sensor network, if Z-Wave certified controller features remote access, you can now control five outlets from your mobile phone each one. Five outlets can manual On/Off the same time by push button. The two USB ports provide 5V/2.1A charging power for MP3/ mobile phone.etc..
Product Picture
1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network. 2. Once the controller is ready to include your device, press up and release the toggle to include it in the network. 3. Once your controller has confirmed that the device has been included, refresh the Z-Wave network to optimize performance. 4. The device is associated in the same group when it included in setting process. Now you can control your Z-Wave device according to groups, scenes, schedules and automation programmed.
1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network. 2. Once the controller is ready to Exclude your device, press up and release the toggle to exclude it from the network.
1. Press and hold the top button for at least 3 seconds while you plug the smart switch into a receptacle. 2. Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.