show home
In-Wall Smart Dimmer
ZW31
Light Dimmer Switch
HW: 1 FW: 20.15
ZM5202
6.51.06
0x015D (349)
0x0112 (274)
0x1F1C (7964)
ZC10-16065099
2016-05-27 13:53:14.4132
N/A
Routing Slave
Always On Slave
In-wall Smart Dimmer
It is an In-wall type device controlled by Z-Wave controller and can be configured in Z-Wave sensor network, if Z-Wave certified controller features remote access, you can dim lights at home from your mobile phone separately, and manual dim light by push button .
Product Picture
1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network. 2. Once the controller is ready to include your device, triple press the Up/Down push button to include it in the network. 3. Once your controller has confirmed that the device has been included, refresh the Z-Wave network to optimize performance. 4. The device is associated in the same group when it included in setting process. Now you can control your Z-Wave device according to groups, scenes, schedules and automation programmed.
1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network. Once the controller is ready to Exclude your device, triple press the Up/Down push button to exclude it from the network.
Use controller to remove device from network will reset it to factory default. *Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.
| Type | Value(s) |
|---|