show home
Smart Plug(1 Channel)
ZW36
On/Off Power Switch
HW: 0 FW: 20.15
ZM5202
6.51.06
0x015D (349)
0x0211 (529)
0x241C (9244)
ZC10-16065097
2016-05-27 13:54:52.4592
N/A
Routing Slave
Always On Slave
Smart Plug(1 Channel)
The smart plug provides one Z-Wave outlet for remote controlled by controller and can be configured in Z-Wave sensor network, if Z-Wave certified controller features remote access, you can now control your device from your mobile phone devices. The outlets have maximum load for 600W Incandescent, ½ HP motor or 1200W resistive.
Product Picture
1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network. 2. Once the controller is ready to include your device, quick triple press the button to include it into the network. 3. Once your controller has confirmed that the device has been included, refresh the Z-Wave network to optimize performance. 4. The device is associated in the same group when it included in setting process. Now you can control your Z-Wave device according to groups, scenes, schedules and automation programmed.
1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network. 2. Once the controller is ready to Exclude your device, quick triple press the button to exclude it from the network.
Use controller to remove device from network will reset it to factory default. ""Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.""
| Type | Value(s) |
|---|