This Z-Wave.Me dimming Flush-Mountable is intended to control lamps, both with resistive or inductive load. A pattress box is needed for installation. The insert has two buttons. In order to use them for local control the Flush-Mountable needs to be completed with a switching paddle and a mounting frame of one of DUWIs switching series “Everlux” or “Arcada”. The device is a conventional leading-edge phase control dimmer with support for inductive loads such as transformers. Additionally conventional resistive loads such as incandescent lamps or 230 V halogen lamps can be dimmed as well. Technical Data: • Power rating: 230V, 50 Hz • Wiring: 2-wire-system • Maximum loads:   - Incandescent lamps: 40...300W   - 230V (HV) halogen: 40...300W   - Low voltage halogen with standard transformer (inductive load): 30...300VA   - Low voltage halogen with switched power supply (reactive load): no   - Fluorescent light: 30…300VA, only dimmable lamps • Installation: in pattress box • Distance: up to 30 m in buildings • Display: Multicolour-LED • Interaction: two buttons to be completed with switching paddle for local operation • Power supply: via 230 V power • Dimensions: 48mmx48mmx23mm