show home
Shock Sensor
ZW1105
Notification Sensor
HW: 1 FW: 20.15
ZM5202
6.51.06
0x015D (349)
0x2003 (8195)
0xB51C (46364)
ZC10-16105260
2016-10-06 14:45:53.4848
N/A
Routing Slave
Reporting Sleeping Slave
Yes
Shock Sensor
The Shock sensor is designed to detect vibration in objects. When vibration is detected, the sensor will transmit an alarm signal to controller.
Product Picture
1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network. 2. Once the controller is ready to include your device, triple click the Tamper switch to include it in the network.
1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network. 2. Once the controller is ready to Exclude your device, triple click the Tamper switch to exclude it from the network.
Press and hold Tamper switch for at least 3 seconds while you insert the batteries. Use this procedure only in the event that the network primary controller is missing or otherwise inoperable
| Type | Value(s) |
|---|
| Sensor type |
|---|
| General Purpose |