Click on Advanced Network Settings Use “Learn Mode” button in gateway user interface Controller learn mode is used to perform the following actions: •Add controller to another Z-Wave network •Remove controller from its current Z-Wave network •Transfer SIS role from current primary controller to this controller. •Receive network information from primary controller, if controller is an inclusion or secondary controller in the current Z-Wave network

Please use this procedure only when the network primary controller is missing or otherwise inoperable. Click on Advanced Network Settings Use “Controller Reset” button in gateway user interface Reset Z-Wave module to default settings. This will effectively delete the current Z-Wave network and create a new one. All your devices will be deleted and it will be necessary to remove them prior to adding them to another Z-Wave network.

Click on Advanced Network Settings Use “Discover” button in gateway user interface Add a Z-Wave device to the current Z-Wave network Devices added with the device manager will be configured in the following way and in the following order: •Z-Wave inclusion •Z-Wave secure inclusion, if the device being added supports the Security command class •Configuration/interview of certain command classes that are supported by the device being included •Return routes assignment to primary controller • To copy network data to another controller click the DISCOVER button and put the other controller in learn mode. This is typically done to transfer information about newly joined devices to other controllers.

Click on Advanced Network Settings Use “Exclude” button in gateway user interface Remove a Z-Wave device from the current Z-Wave network