Inovelli
Smart Plug (Dimmer)
NZW39
Light Dimmer Switch
HW: 1 FW: 20.15
ZM5202
6.51.06
0x0312 (786)
0xB212 (45586)
0x271C (10012)
ZC10-17045573
2017-04-27 17:02:19.234453
N/A
Routing Slave
Always On Slave
Smart Plug (Dimmer) | Z-Wave Plus Smart Plug & Repeater
Inovelli's Smart Plug-In Dimming Module + Repeater has the ability to dim & turn on and off your lights from anywhere in the world. In addition to the outlet, the smart plug acts as a Z-Wave signal repeater, which amplifies your Z-Wave signal, growing the capabilities of your network. This smart plug is one of the smallest plugs on the market (3.5"x2.5"x1.5") and has 1 Z-Wave Dimming Outlet on the side of the device allowing for easy fit in compact places. Simplifying lives, one smart home product at a time... that's Inovelli.
Product Picture
1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network. 2. Once the controller is ready to include your device, quick triple press the button to include it into the network. 3. Once your controller has confirmed that the device has been included, refresh the Z-Wave network to optimize performance. 4. The device is associated in the same group when it included in setting process. Now you can control your Z-Wave device according to groups, scenes, schedules and automation programmed. ** For HUB Specific Instructions, please visit: www.inovelli.com/nzw39-setup
1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network. 2. Once the controller is ready to Exclude your device, quick triple press the button to exclude it from the network. ** For HUB Specific Instructions, please visit: www.inovelli.com/nzw39-setup
Use controller to remove device from network will reset it to factory default. ""Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.""
| Type | Value(s) |
|---|