Aeotec
Z-Stick Gen5
ZW090-G
N/A - Hardware Device
HW: 90 FW: ERROR
ZM5101
6.51.09
N/A
N/A
N/A
ZC10-17075698
2017-07-11 19:26:25.061473
N/A
Static Controller, No Repeater
N/A - Hardware Device
Aeotec Z-Stick Gen5 is a USB controller.
Aeotec Z-Stick Gen5 is a USB controller. When connected to a host controller via USB, it enables the host controller to take part in the Z-Wave network. Products that are Z-Wave certified can be used and communicate with other Z-Wave certified devices.
Plug the Z-Stick into USB port of your host Controller and then click the “Learn” button on your PC/host Controller application.
Use this procedure only in the event that the primary controller is missing or otherwise inoperable. Press and hold the Action Button on Z-Stick for 20 seconds and then release.
Support Over The Air for firmware Upgrade.
Plug the Z-Stick into USB port of your host Controller and then click the “Inclusion” button on your PC/host Controller application.
Plug the Z-Stick into USB port of your host Controller and then click the “Exclusion” button on your PC/host Controller application.