The Android APP application, please see manual 5.1.3 Ensure the Gateway not include any device or Reset the Gateway. You can review and control the device for learned Gateway. Into the Learn Mode, show “Processing…”, operate another Controller into add device mode, after the completion of the study to be prompted to add success. When you need initiate a replication of network information from the controller to another controller or want to receive network information, please enter ""include"" and ""learn mode"".

The Android APP application, please see manual 5.1.4&4.1.5 Click “Reset”, show “Are you sure to reset Z-Dongle?”and click OK to reset the Z-Wave network,or FG3200/FG2200 Reset button 10 seconds after the reset to reset the factory default. And manual P.10 The gateway will send DEVICE_RESET_LOCALLY_NOTIFICATION to associated Z-Wave devices when it is reset or factory-reset. manual P.22 If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable

The Android APP application, please see manual 5.1.1 Ensure Gateway is connected, enter device page and click “Inclusion” to include devices. After the inclusion show window is finished, you can view the device at the device interface.

The Android APP application, please see manual 5.1.2 Ensure Gateway is connected, enter device page and click “Exclusion” to exclude devices. After the exclusion show window is finished, you can view the device is remove from the device interface.