Zipato
Zipato Carbon Monoxide Sensor
hm-hs1ca-z.eu
Notification Sensor
HW: 255 FW: 1.10
ZM5202
6.51.08
0x0131 (305)
0x8005 (32773)
0x1000 (4096)
ZC10-17115860
2017-11-16 18:36:20.054114
N/A
Routing Slave
Reporting Sleeping Slave
Yes
Zipato Carbon Monoxide Sensor (Z-Wave) is designed to give early warning of higher carbon monoxide level, based on Z-Wave technology.
Zipato Carbon Monoxide Sensor (Z-Wave) is designed to give early warning of higher carbon monoxide level, based on Z-Wave technology. Z-Wave is a wireless communication protocol designed for remote control of appliances in residential automated homes and light commercial environments.
Product Picture
Press button on sensor 3 times within 1.5s, Green LED will blink 3 times within 1 second. If Inclusion Process is successful, Green led will turn off.
Press button on sensor 3 times within 1.5s, Green LED will blink 3 times within 1 second. If Inclusion Process is successful, Green led will turn off.
Wake up Notification is transmitted every 24 hours by default. Wake up Notification is transmitted after Notification Report is Transmitted
Remove battery. Insert battery while holding button on sensor. Please use this procedure only when the network primary controller is missing or otherwise inoperable.
| Type | Value(s) |
|---|
| Group | Type |
|---|---|
| CO Alarm | (Refer to parameters): State idle |
| Home Security | (Refer to parameters): State idle |