Zipato
Smart Smoke Sensor
hm-hs1sa-z.eu
Notification Sensor
HW: 255 FW: 1.10
ZM5202
6.51.08
0x0131 (305)
0x8002 (32770)
0x1000 (4096)
ZC10-17115870
2017-11-21 03:52:37.709088
N/A
Routing Slave
Reporting Sleeping Slave
Yes
Zipato Smart Smoke Sensor (Z-Wave) is designed to give early warning of developing fires by sounding the built-in alarm horn, based on Z-Wave technology.
Zipato Smart Smoke Sensor (Z-Wave) is designed to give early warning of developing fires by sounding the built-in alarm horn, based on Z-Wave technology. It can not sense gas, heat, flame and cannot prevent or put out the fire.
Product Picture
- Press the Net_Button 3 times within 1.5s, Green LED is Blinking 3 times within 1 second. - If Inclusion Process is successful, Green led will turn off.
- Press the Net_Button 3 times within 1.5s - If Exclusion Process is successful, Green led is Blinking 6 times, then turn off.
- Wake up Notification is transmitted every 24 hours by default. - Wake up Notification is transmitted after Notification Report is Transmitted
-Long press Net_Button while installing batteries in HS1SA-Z. - Device Reset Locally notification is Transmitted. -Please use this procedure only when the network primary controller is missing or otherwise inoperable.
| Type | Value(s) |
|---|
| Group | Type |
|---|---|
| Smoke Alarm | State Idle |