Launch the Trinity web app (service providers and network administrators only). Click the ""Learn Mode"" button. A Network operation modal will appear telling of the pending operation. Trinity will display the Energy Bridge's DSK for entry into the including controller's UI. The first five digits will be bold and highlighted. An operation success or error message will be printed when the operation completes. This will also include diagnostic information. Click the ""Close"" button after the operation has completed.

Launch the Powerley app. From the navigation menu, select My Devices (Device icon), select Energy Bridge. On the Energy Bridge tab, scroll to ""Z-Wave"", and select ""Reset Network"", and on the next screen, tap ""Begin Z-Wave Network Reset"". A warning will display alerting the user that this will reset the network and disconnect all devices and to only use in the event the network or device is no longer operable. The screen will then ask the user to confirm by typing ""RESET"" to complete the factory reset. If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.

Launch the Powerley app. From the navigation menu, select My Devices (Device icon), and select the Add Device icon (+). Select the Device Type from the list of device categories, and then choose either the specific device (if listed) or Generic Z-Wave device. On next screen, place Energy Bridge into Inclusion mode by hitting ""Begin Searching"" button on screen.

Launch the Powerley app. From the navigation menu, select My Devices (Device icon), select the Device Type from the list of device categories, and choose the specific included device by hard pressing on the device icon. On the device page, select ""Remove"" in the upper right hand corner, and then select ""Exclude Device"". On the next screen, tap ""Begin Excluding"" to exclude the device. Alternatively, visit My Devices, select Energy Bridge. On the Energy Bridge tab, scroll to ""Z-Wave"", and select ""Enter Exclusion Mode"", and on the pop up, tap ""Exclude""