EcoNet Controls
Flood leak sensor
EZW1204
Notification Sensor
HW: 1 FW: 1.01
ZM5202
6.71.01
0x0312 (786)
0x2003 (8195)
0xC41C (50204)
ZC10-18015939
2018-01-05 17:07:20.603281
N/A
Enhanced 232 Slave
Reporting Sleeping Slave
Yes
Z-Wave flood leak sensor, EZW1204, Make your home a Smart Home. Prevent water damage and expensive insurance claims.
EcoNet's Leak/Flood Sensor is compatible with most popular Smart Home systems including Samsung's SmartThings, Wink, Vera and Homeseer. After included/paired and Smart Home automated, simply place the Leak Sensor on the floor in the laundry room, bathroom or any water sensitive area to receive leak notifications to your smart phone. Add EcoNet's Valve Robot for Automatic water shut off in the case of a leak. The sensor can also be wall mounted using the included snap-in base with the wired leak tab.
Product Picture
1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network. 2. Once the controller is ready to include your device, press up and release the toggle to include it in the network. 3. Once your controller has confirmed that the device has been included, refresh the Z-Wave network to optimize performance. 4. The device is associated in the same group when it included in setting process. Now you can control your Z-Wave device according to groups, scenes, schedules and automation programmed.
1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network. 2. Once the controller is ready to Exclude your device, press up and release the toggle to exclude it from the network.
Open the shell, wake up immediately
Please use this procedure only when the network primary controller is missing or otherwise inoperable.
| Type | Value(s) |
|---|
| Group | Type |
|---|---|
| Water Alarm | (Refer to parameters): State idle |
| Sensor type |
|---|
| Water Flow |