keyWe
keyWe Smart Lock
GKW-2000D
Door Lock - Keypad
HW: 1 FW: 1.00:01.00
ZM5101
6.71.01
0x037B (891)
0x0002 (2)
0x0001 (1)
ZC10-18066139
2018-04-18 16:33:37.984033
N/A
Enhanced 232 Slave
Listening Sleeping Slave
Yes
Smart lock that can be used conveniently with Z-Wave and Bluetooth.
The GKW-2000D is a smart lock that can be conveniently used with Z-Wave and Bluetooth. You can control the door lock directly from the phone via the Bluetooth function in close range. You can also check the status of the door lock on the outside by connecting to the Z-Wave hub. You can also control door locks and check status via Google Home or Amazon Alexa. This device does not support Smartstart.
Product Picture
Please proceed with the door lock open. 1. Set the controller in inclusion mode. 2. Open the battery cover of the indoor body and press the [REG] button. 3. Press the Master Pin [****(Default:1234)] button after pressing the [#] button. 4. Press the [88] button after pressing the [*] button.
Please proceed with the door lock open. 1. Set the controller in exclusion mode. 2. Open the battery cover of the indoor body and press the [REG] button. 3. Press the Master Pin [****(Default:1234)] button after pressing the [#] button. 4. Press the [99] button after pressing the [*] button.
Please proceed with the door lock open. Please use this procedure only when the primary controller is missing or otherwise inoperable. 1. Open the battery cover of the indoor body and press the [REG] button. 2. Press the Master Pin [****(Default:1234)] button after pressing the [#] button. 3. Press the [5] button after pressing the [*] button. 4. Press the [2] button after pressing the [*] button. 5. Press the Master Pin [****(Default:1234)] button after pressing the [#] button *Master pins can change user settings.
| Type | Value(s) |
|---|
| Group | Type |
|---|---|
| Access Control | (Refer to parameters): State idle |