Zooz
Paddle Dimmer Switch
ZW313
Light Dimmer Switch
HW: 1 FW: 1.00
ZM5202
6.71.03
0x0312 (786)
0xA000 (40960)
0xA002 (40962)
ZC10-18106284
2018-10-30 00:01:09.514198
N/A
Enhanced 232 Slave
Always On Slave
It is an In-wall type device controlled by Z-Wave controller and can be configured in Z-Wave sensor network, if Z-Wave certified controller features remote access .
It is an In-wall type device controlled by Z-Wave controller and can be configured in Z-Wave sensor network, if Z-Wave certified controller features remote access, you can dim lights at home from your mobile phone separately, and manual dim light by push button .
Product Picture
1 - Locally Button function
Locally Button functionSize: 1 byte
Default: 0
Minimum: 0
Maximum: 0
Possible values
| From | To | Desription |
|---|---|---|
| 0 | 0 | Up Button ON,Down Button OFF |
| 1 | 1 | Up Button OFF,Down Button ON |
2 - Status LED Configuration
Status LED ConfigurationSize: 1 byte
Default: 0
Minimum: 0
Maximum: 0
Possible values
| From | To | Desription |
|---|---|---|
| 0 | 0 | Output ON,Led OFF. |
| 1 | 1 | OutputOFF,Led ON. |
| 2 | 2 | Always OFF |
| 3 | 3 | Always ON |
4 - Count Down Configuration(Turn off the output by time）
Count Down Configuration(Turn off the output by time）Size: 2 bytes
Default: 0
Minimum: 0
Maximum: 0
Possible values
| From | To | Desription |
|---|---|---|
| 0 | 0 | Auto Turn-OFF Timer Disabled |
| 1 | 1 | Auto Turn-OFF Timer Enabled |
| 0 | 65535 | Count Down Configuration(Turn off the output by time） |
5 - Enable Auto Turn-ON Timer
Enable Auto Turn-ON TimerSize: 1 byte
Default: 0
Minimum: 0
Maximum: 0
Possible values
| From | To | Desription |
|---|---|---|
| 0 | 0 | Auto Turn-ON Timer Disabled |
| 1 | 1 | Auto Turn-ON Timer Enabled |
6 - Count Down Configuration(Turn ON the output by time）
Count Down Configuration(Turn ON the output by time）Size: 1 byte
Default: 0
Minimum: 0
Maximum: 0
Possible values
| From | To | Desription |
|---|---|---|
| 0 | 65535 | Count Down Configuration(Turn ON the output by time） |
7 - Association Setting Parameter
Association Setting ParameterSize: 1 byte
Default: 1
Minimum: 0
Maximum: 0
Possible values
| From | To | Desription |
|---|---|---|
| 0 | 0 | None |
| 1 | 1 | Local |
| 2 | 2 | 3-way |
| 3 | 3 | 3-way&ocal |
| 4 | 4 | Z-Wave Hub |
| 5 | 5 | Z-Wave Hub&Local |
| 6 | 6 | Z-Wave Hub &3-way |
| 7 | 7 | Z-Wave hub&Local&3-way |
| 8 | 8 | Timer |
| 0 | 0 | |
| 0 | 0 | |
| 9 | 9 | Timer&Local |
| 10 | 10 | Timer &3-way |
| 11 | 11 | Timer &3-way&Local |
| 12 | 12 | Timer&Z-Wave Hub |
| 13 | 13 | Timer&Z-Wave hub&Local |
| 14 | 14 | Timer&Z-Wave hub&3-way |
| 15 | 15 | All |
8 - Restores state after power failure
Restores state after power failureSize: 1 byte
Default: 2
Minimum: 0
Maximum: 0
Possible values
| From | To | Desription |
|---|---|---|
| 0 | 0 | Output OFF |
| 1 | 1 | Output ON |
| 2 | 2 | The state before a power outage. |
9 - Dimmer Speed Parameter
Dimmer Speed ParameterSize: 1 byte
Default: 1
Minimum: 0
Maximum: 0
Possible values
| From | To | Desription |
|---|---|---|
| 1 | 99 | Dimmer Speed need xx S |
10 - Multilevel minimum value can be set（The minimum luminance value of the dimming）
Multilevel minimum value can be set（The minimum luminance value of the dimming）Size: 1 byte
Default: 0
Minimum: 0
Maximum: 0
Possible values
| From | To | Desription |
|---|---|---|
| 0 | 99 | Multilevel minimum value can be set（The minimum luminance value of the dimming） |
11 - Multilevel maxmum value can be set（The maxmum luminance value of the dimming）
Multilevel maxmum value can be set（The maxmum luminance value of the dimming）Size: 1 byte
Default: 99
Minimum: 0
Maximum: 0
Possible values
| From | To | Desription |
|---|---|---|
| 0 | 99 | Multilevel maxmum value can be set（The maxmum luminance value of the dimming） |
12 - when switch is off and quickly press UPPER paddle 2 times, switch turns on to x brightness
when switch is off and quickly press UPPER paddle 2 times, switch turns on to x brightnessSize: 1 byte
Default: 0
Minimum: 0
Maximum: 0
Possible values
| From | To | Desription |
|---|---|---|
| 0 | 0 | turn on to 99 |
| 1 | 1 | turn on to the value relate with parameter 11 |
Inclusion the ZW313 from the existing Z-Wave home control network with your primary controller. 1---Refer to your primary controller instructions to process the inclusion / exclusion setup procedure. 2---When prompted by your primary controller, click the Up or Down button three times in one second.
Exclusion the ZW313 from the existing Z-Wave home control network with your primary controller. 1---Refer to your primary controller instructions to process the inclusion / exclusion setup procedure. 2---When prompted by your primary controller, click the Up or Down button three times in one second.
Press click Z-Wave button 2 times quickly,and hold for at least 10 seconds. to restore the device to the factory Please use this procedure only when the network primary controller is missing or otherwise inoperable.
| Type | Value(s) |
|---|