Starvedia
Smart Home Gateway
G1
Central Controller
HW: 0 FW: 6.01:04.00:00.00:34.00
ZM5304
6.81.01
0x0265 (613)
0x0001 (1)
0x0004 (4)
ZC10-18116312
2018-11-16 20:37:30.299854
N/A
Static Controller
Central Static Controller
Smart Home Z-Wave gateway/controller.
The G1 Z-Wave Gateway is a Smart Home Solution on a Cube. With this gateway, you can control all Z-Wave devices in your house through your iPhone/iPad and Android mobiles/pads. Push notification on iPhone/iPad and Android for device and scene events. Plug & play by ID/password. Control up to 120 Z-Wave devices. Support Amazon Alexa and Google Home. Support IFTTT. Support Geo-Sense. Internal real time clock. Watchdog function to prevent system failure.
Product Picture
Open the App mCamviewZ+ and go to ""Home Settings"" > ""Camera settings"" > ""Admin"" > ""Z-Wave administration"" page, click ""Z-Wave Learn Mode"" will put the camera into learn mode
Open the App mCamviewZ+ and go to ""Home Settings"" > ""Camera settings"" > ""Admin"" > ""Z-Wave administrator"" page, click ""Z-Wave Reset"" will reset the Z-Wave Settings of the camera. If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.
Open the App mCamviewZ+ and press the ""+"" button under the ""Device"" menu, the camera will go into inclusion mode. User can now trigger the Z-Wave device into its inclusion mode and add it to the camera's Z-Wave network.
Open the App mCamviewZ+ and press the ""-"" button under the ""Device"" menu, the camera will go into exclusion mode. User can now trigger the Z-Wave device into its exclusion mode and remove it from the camera's Z-Wave network.
| Type | Value(s) |
|---|