homee
homee Z-Wave 700 Series Cube
HOMEE-005
Gateway
HW: 3 FW: 7.15:07.15
EFR32Z
7.15.4
0x0456 (1110)
0x0013 (19)
0x3800 (14336)
ZC12-21090308
2021-08-30 15:09:21.17851
N/A
Bridge Controller
Central Static Controller
The Z-Wave™ Cube is a modular addition to the homee base cube - the "Brain Cube"
With Z-Wave™ Cube as a supplement to your Brain Cube you can control hundreds of smart home devices which use Z-Wave technology. You could use Z-Wave™ Cube to control your blinds and roller shutters by making them smart with the Fibaro Roller Shutter2 insert switch. You can define times when heating should be tuned to any chosen comfort temperature, saving you money on heating - this is no problem with the Danfoss LC-13 radiator thermostat. Via our homeegrams, radiator thermostats can automatically be switched off once a window is opened, helping you to prevent energy waste. If security is your concern, you can add devices such as smoke detectors to your home, which alert you via push notification of fire or smoke, while also opening the blinds and turning on lights in order to create escape routes. Once you leave your apartment, you can enable homeegrams alerting you if one of your door, window or motion sensors detect an unexpected event during your absence. Additionally, you could fire off an alarm siren like the Aeotec Siren.
Product Image
If the ZWave cube is reset to factory defaults, all connected Z Wave devices will be removed, and the cube gets a new Home ID. If homee is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to remove and add all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.
If the Z Wave cub e is reset to factory defaults, all connected Z Wave devices will be removed, and the cube gets a new Home ID. If homee is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessar y after the reset to remove and add all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller
NOTE: The only way to see the DSK is via our app. The connection between our app and our gateway is a secure websocket connection. The DSK is not pyhsically printed on the casing or packaging.
Node Rediscovery
If the ZWave cube is reset to factory defaults, all connected Z Wave devices will be removed, and the cube gets a new Home ID. If homee is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to remove and add all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.
Add Z-Wave Device (SmartStart)
Add Z-Wave Device (General)
Remove Z-Wave Device
Add Z-Wave Device (SmartStart)
| Type | Value(s) |
|---|
| Group | Type |
|---|---|
| Smoke Alarm |
|
| CO Alarm |
|
| CO2 Alarm |
|
| Heat Alarm |
|
| Water Alarm |
|
| Access Control |
|
| Power Management |
|
| Clock |
|
| Siren |
|
| Weather Alarm |
|
| Light sensor |
|
| Home monitoring |
|
| Sensor type |
|---|
| Air Temperature |
| General Purpose |
| Power |
| Humidity |
| Velocity |
| Direction |
| Atmospheric Pressure |
| Barometric Pressure |
| Solar Radiation |
| Rain Rate |
| Voltage |
| Current |
| Carbon Dioxide (CO2) Level |
| Air Flow |
| Water Temperature |
| Soil Temperature |
| Moisture |
| Time |
| Outside Temperature |
| Meter type |
|---|
| Electric Meter Consumption |