Enbrighten
Enbrighten Z-Wave Plus In-Wall Smart Dimmer, White and Light Almond Paddles, 700S
58438/ZWA3016
Multilevel Switch DT
HW: 01 FW: 01.21
ZGM130S037HGN2 / ZGM130S037HGN1
7.15.4
0x0063 (99)
N/A
0x4944 (18756)
ZC14-21110008
2021-11-05 09:58:30
N/A
Enhanced 232 Slave
Always On Slave
Experience the latest generation of Z-Wave™ smart controls for in-wall configurations with paddle-style dimmers to accommodate any home.
Adding your device to a Z-Wave network: 1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network. 2. Once the controller is ready to add your device, press the top or bottom of the wireless smart dimmer (ro
To remove and reset the device: 1. Follow the instructions for your Z-Wave certified controller to remove a device from the Z-Wave network. 2. Once the controller is ready to remove your device, press the top or bottom of the wireless smart dimmer (
To return your switch to factory defaults: Pull the airgap switch. Press and hold the bottom button, push the airgap switch in and continue holding the bottom button for 10 seconds. The LED will flash once each of the 8 colors then stop. NOTE: This
Page 1, box 4
| Type | Value(s) |
|---|