* The device support two methods of inclusion, When using a Z-Wave Plus® certified controller choose Network Wide Inclusion or SmartStart. * TAP the button once times to ADD/INCLUDE the device. * Network Wide Inclusion To A Z-Wave® Network * TAP the button once times to REMOVE/EXCLUDE the device * Refer to your primary controller instructions to process the inclusion / exclusion setup procedure. * When prompted by your primary controller, click the Z-Wave button one times . .

* The device support two methods of inclusion, When using a Z-Wave Plus® certified controller choose Network Wide Inclusion or SmartStart. * TAP the button once times to ADD/INCLUDE the device. * Network Wide Inclusion To A Z-Wave® Network * TAP the button once times to REMOVE/EXCLUDE the device * Refer to your primary controller instructions to process the inclusion / exclusion setup procedure. * When prompted by your primary controller, click the Z-Wave button one times . .

Factory Reset：Remove the switch from power. Press and hold the manual button, plug the switch in and continue holding the manual button for 3 seconds. Note: Please use this procedure only when the network primary controller is missing or otherwise inoperable.

SCAN THE QR CODE / ENTER THE 5-DIGIT DSK, visual arrow pointing to the DSK PIN code on the switch