Rently
Rently Smart Bolt Elite Flex
LOCK420-4Z
Lock DT
HW: 01 FW: 01.02:03.24
EFR32ZG23A
7.18.8
0x0439 (1081)
0x0004 (4)
0x0320 (800)
ZC14-25010494
2025-01-15 09:54:13
N/A
Enhanced End Node 232
Listening Sleeping End Node
Yes
The next generation of Rently's Z-Wave® enabled deadbolt is the future of access control for rental homes, featuring increased security, durability, and battery life for worry-free property management and a smooth renter experience.
1 - Enable or disable voice
Enable or disable voiceSize: 1 byte
Default: 1
Minimum: 0
Maximum: 1
Possible values
| From | To | Desription |
|---|---|---|
| 0 | 0 | 0 |
2 - Timed battery report
Timed battery reportSize: 2 bytes
Default: 1440
Minimum: 0
Maximum: 14400
Possible values
| From | To | Desription |
|---|---|---|
| 0 | 0 | 0 |
3 - Association Group 2 Settings
Association Group 2 SettingsSize: 1 byte
Default: 1
Minimum: 0
Maximum: 6
Possible values
| From | To | Desription |
|---|---|---|
| 0 | 0 | 0 |
4 - Bluetooth MAC address of part 1
Bluetooth MAC address of part 1Size: 4 bytes
Default: 0
Minimum: 0
Maximum: 4294967295
Possible values
| From | To | Desription |
|---|---|---|
| 0 | 0 | 0 |
5 - Bluetooth MAC address of part 2
Bluetooth MAC address of part 2Size: 2 bytes
Default: 0
Minimum: 0
Maximum: 65535
Possible values
| From | To | Desription |
|---|---|---|
| 0 | 0 | 0 |
1. Follow the user guide of hub to enter inclusion mode. 2. Operate on lock Enter "Include mode": Log in RentlyApp*, select the appropriate lock, click to enter the lock menu, select "Configure Zwave Mode" --> PAIRING
1. Follow the user guide of hub to enter exclusion mode. 2. Operate on lock Enter "Exclusion mode": Log in RentlyApp*, select the appropriate lock, click to enter the lock menu, select "Configure Zwave Mode" --> UNPAIRING
Operations on lock Enter "Reset Mode": Log in RentlyApp*, select the appropriate lock, click to enter the lock menu, select "Configure Zwave Mode" --> RESTORE If reset is successful, the lock will reset itself to factory default by sending a "Device Reset Locally Notification" to gateway. Note: Please use this procedure only when the network primary controller is missing or otherwise inoperable
You can find the QR code on the back of your door lock. You may also find the QR Code and DSK on individual package of each product. Please do not remove or damage them.
| Type | Value(s) |
|---|
| Group | Type |
|---|---|
| Access Control |
|
| Power Management |
|
| System | HW status: System hardware failure |