This in-wall switch module is a transceiver which is a Z-Wave enabled device and is fully compatible with any Z-Wave enabled network. Z-Wave enabled devices displaying the Z-Wave logo can also be used with it regardless of the manufacturer, and ours can also be used in other manufacturer’s Z-Wave enabled networks. Remote On/Off control of the connected load is possible with other manufacturer’s Wireless Controller. This in-wall switch module is able to detect overload wattage of connected non-dimmable lights or appliances. When detecting overload state, the Module will be disabled and its On/Off button will be lockout of which LED will flash quickly. However, disconnect and re-connect the wiring of the Module will reset its overload condition to normal status. Two additional digital inputs allow user to manual switch on/off the module for normal operation and can manual execute inclusion/exclusion/association at the first 3 minute when the first power is applied, this can let installer easy to configure even the module already install inside the wall box.